Rate my creation anons and post yours - ghetto versions only pls
> yet another homegym thread
Rate my creation anons and post yours - ghetto versions only pls
Brandon Barnes
Andrew Allen
The big weights are 100lbs each and the small ones are 45lbs each. Just concrete in buckets. The whole thing cost me around $75.
> bump
Kevin Gonzalez
what an ugly incel-tier home
Benjamin Morgan
The safety being built on a bit of thing chipboard doesn't look good
Tyler Mitchell
Post yours then faggot
Samuel White
Sorry man, thought you'd just saved a pic from somewhere. Didn't mean to be a bitch.
Levi Gray
I'm calling OSHA.
Connor Gray
Looks overbuilt and unsafe at the same time.
Nicholas Richardson
Have tested it up to 400lbs (me + loaded bar). It's 1" plywood do you think it'll hold?
Jason Martin
R8 my pl8s m8s
Ryan Lopez
I wouldn't trust those bolts to hold the weight user
I built it for squats, pullup, seated ohps, dips, and different bench orientations tho. Since it's not bolted to the floor I had to overbuild for stability.
Anthony Thompson
Feedback appreciated pls
> another bump
Thomas Ramirez
>Since it's not bolted to the floor I had to overbuild for stability.
I don't see what that big rectangle sitting on the floor can do for you though. Meanwhile, the whole thing has nothing to hold it form wobbling laterally (turning into a parallelogram).
Also, the weights seem to rest on some thin stuff, but maybe that's just the pic angle.
Caleb Smith
So you live at your parents' place? Why do you have so many shoes?
Nolan Foster
I used to be a richfag slayer before I became a lifting incel poorfag so I have acquired a lot of shoes, watches, clothes etc that I don't use now and don't want to get rid of desu
Mason Cox
Thanks for the input user I'll cross-brace to prevent parallelogram. Can't bolt it to the wall or floor unfortunately
Cameron Cook
>I used to be a richfag slayer before I became a lifting incel poorfag
Storytime pls
Ryan Collins
with your hand at face level, push it from left to right and see if it holds the square angles
Grayson Edwards
Bought a bunch of crypto shitcoins. Went from having $500k something to less than $100k now. I live in a poverty subsidized housing now with a bunch of boomer basketball americans. I'm a NEET cunt too
Carson Lewis
Yeah I've tested it and it hold without parallelograming with me pushing it but I'll still cross brace in case I have to throw the weight. Max weight I have rn is 2x100 + 2x45 + 15lbs bar so it's only 305
Ethan Phillips
>100k
>subsidized housing
not how it works nigga. i get denied for food stamps when i have more than $600 to my name.
Aiden Evans
Yeah but I'm a wageless NEET and they can't / won't acknowledge crypto. When I moved in a year ago the requirement was my income had to be
Josiah King
Trust me when I say you don't want to do that.
I mean, do you even have the momentum for a triple-flip calf-flip smackdown double roll?.
Aaron Ross
Shoulda put safeties through the 4x4s
Owen Reyes
Hard to say since I'm coming off a dreamer hulk rn. Momentum is m*v and my mass is greater but my speed is slower than it used to be. Will need to run the simulations desu
Leo Lewis
Forgot pic.
Matthew James
Got a couple 45lb plates my roommate found. Also have been making concrete plates from pvc, quickrete, and plant saucers
Grayson Flores
Mirin the bar lad. Why is the rack so tall though
John Taylor
Was going to build in a pullup bar at the top, but then decided I preferred having the two sides of the rack to not be connected together. Makes it easier to fold up along the side of the house when not in use
William Collins
Someone in SoCal is selling these bad boys for 600 they look pretty sturdy if you can replicate it
Hunter Diaz
Aaron Martinez
Carson Gonzalez
I ended up adding a little more support on the bench hooks and added hooks for squats/overheads. But fucking terrible weather over the past couple weeks is stopping me from using it.
That's a sturdy looking setup. Whoever makes those must be really talented at woodworking because getting something to come out as pristine and precise as that is hard as fuck
Jayden Watson
Anybody got any ideas for adjustable Olympic dumbbells?
I have all the 2 inch and 1 inch tubing you could want. I was thinking of fixing a long piece of the 1 inch pipe inside the 2 inch pipe with concrete and using the bigger one tubing as sleeves for the plates I already have, but I'm not sure if it will work.