I just built a $2500 PC and it won't even power up. I triple checked every possible cable and wire and everything is in its right place but when I press the power button absolutely nothing happens. What are my options besides chucking it in the dumpster behind my apartment complex or filling it with cockroaches and selling it on eBay?
I just built a $2500 PC and it won't even power up...
Luke Sanchez
Other urls found in this thread:
Sebastian Perez
take it in to the store you bough most parts from. have a service person check it. sometimes you just need a fresh set of eyes.
Nathan Rivera
plug it in?
check power outlet is working?
check power supply output?
fucking THINK
Aiden Garcia
did u make sure the mobo stand offs are screwed in fully? I've missed 1 before and had similar fustrations...
Alexander Sanchez
unfortunately, you have been filtered. your question is like asking "why won't my car start?"
Landon Lee
Try the most random fix that has ever worked for me for the same problem, unplug ALL fans then see if it at least powers on
Henry Jones
This might help
Cooper Hill
Have you tried turning off and back on?
Ayden Flores
moar of those hoes
Jason Flores
I had that happen to me before and it was the power button on the case. Are you seeing any sign of power at all like leds on the mobo?
Henry Gomez
Use a screw driver to complete the circuit touching the power button pins.
Alexander Hall
Provide specs and a pic
Dominic Martin
Ayden Ross
Are you sure your front panel io is in the right spot? On my motherboard a serial connector looked identical and I plugged it in to that and was very frightened when it didn't power on.
Nathan Hall
Its a dead psu, if you have an old pc take the psu from that and see if it powers on
Jackson Reed
Did you plug it in?
Lincoln Wilson
Try jump start boot it with a screwdriver. If that works there's a problem between your pwrbtn pins and the actual case.
Make sure the mobo is mounted properly and grounded.
Post clear pictures here of your cable management etc so anons can actually see and try diagnose.
Oliver Clark
>wonders if OP spent the extra $5...
Jack Torres
So there is this compound you can make called c4... not going to tell you how to make it but look it up.
Then fill entire computer case with it.
Switch on
???
profit
Cooper Roberts
i bet this nigger is not aware of this
Adam Gray
Have you yelled at it? Called it a cunt? Threatened to bury it next to its own dog?
That usually works with my girlfriend.
Cooper Wilson
This is the exact reason my builds have failed to power up before so I'd definitely recommend this. If not check the fuse.
Hunter Taylor
looks like you just bought yourself a $2500 pain in the ass NIGGER
Brody Hall
Mo of these hos?
Anthony Collins
did you even attach the power button to the fucking board? you can hotwire the board by touching a key to the two posts that the power button would connect to. just ground yourself on the case so you don't zap the board with too much.
in this pic it's the two posts next to PW.
Gabriel Wright
First thing I thought but didn't think anyone could be that stupid lol
Jonathan Young
or something. now that i look at that, those are just LEDs i think. anyway, you attach the main cable from the power supply to the board, and then you attach the button to something like that. you only need the power supply to the board to at least try to power it on by hotwiring it.
Cooper Bailey
Start by checking to power back to the MOBO.
Is there power at the....
Wall?
Power supply?
Coming out of the power supply?
etc
Carson Sanders
Leds and the power and reset buttons.
Ryder Martinez
do this OP let's figure out if it's just, like, the switch or the way it's conneted.
Chase Wood
You can try grabbing an old build that works and testing each component to see which of them works so you can replace only the parts that dont work