Thoughts on this guitar design I'm making

Stuff looks out of place because either the image is mirrored or its a leftie guitar.

I essentially built this with a sharpening stone,1 chisel and a loose coping saw blade, oh and a sharpened screw driver, I'm exaggerating but the only other thing I used was a drill and clamps

Its mirrored

Attached: received_1911264475839854.jpg (884x796, 44.21K)

love the color and general shape is cool, a little bit too elongated for my tatse and i would personally add a humbucker but overall good work man.

Does it even have a truss rod? If not, you're fucked.
Good start though

#banananation

It's about the length of a strat, butbits slightly narrower. Its carved so the body is swayed down at the base and the neck is always pointing up, I might put a humbucker in

Attached: 20200425_162940.jpg (1920x1920, 853.8K)

>single coils
Not my bag, but that's a really interesting body shape, for sure! I'd like to see a bridge on, at least.

Yah I'm not a ming mang. I actually ordered a neck out of China's found out its shit then ripped it apart and used it for parts for my neck' then I used stainless steel frets because I had em instead of shit nickel

Attached: received_269066614260613.jpg (864x864, 86.44K)

I ordered guitar strings today,' the one shop in my town is closed' gonna cut the bridge cavity out tomorrow, strings arrive in 10 days, but scientifically speaking I can slap any bridge or pickups on this, it's like the design that I'm interested in in a sense, I'm gonna have a transparent pickguard on this holding the pickups that will be screwed it to the guitar bod. I'm thinking transparent brown

what bridge do you have in mind? i feel like that would look sweet with fender dynamic vibrato

I feel like the pickups look too close to the fretboard to be a normal scale length or the pictures are wonky. Did you measure everything out and check everything?

Otherwise really cool shape man I'd be proud.

This is the sketch I drew 2 months ago that inspired this

Attached: 20200428_042841.jpg (1920x1920, 722.86K)

Look at this
It's all measured out and centred as all fuck

Neck looks wide. If it is an Epiphone/Gibson like-neck, I would probably like it. Not much into thin necks.

Attached: 1516860929054.jpg (433x554, 34.27K)

Okay yeah now I see it.. It was accentuated by the angle of the guitar I think

bredy gud
>>thumbs up

That would look lovely, I enjoy my wilkenson bridge once I figured it out, so I'm sticking to that for my guitar but I hope to sell these and make many versions of this design

if one were as drugged up as bobby here it wouldn't even matter lmao

the wilkensons are dank, i'd go with that too

It's not thin and not wide, just right for my hands to wrap around it and my thump to roll over the 2 lower strings if need be, I really wanna make people custom guitars ' it cost me 60 for the wood and like 10 for the other shit and if this amazing playing guitar, the action literally goes below the thick I of my I'd card