CAN'T BUY A GUN?

It's not a gun so there is no background checks and they can ship to your door

What kind of tools to I need? I have things like low spec torque wrenches, but will I have to pick up anything specialty?

all of them ship to your door. it's just a paperweight, until you do some work.

There's still places where you can buy powder, bullets, and primed cases. This can be shipped to your door and no back ground checks

you sure can, all handloading/reloading supplies are sold the fuck out right now also

also you have to invest in a decent press

Yes. I have been pressing my own 9mm Rounds for a few months. All supplies legally delivered to my door in California.
These are for my p80 g26 I built, which was also shipped here, no problem.
Califags, look into Lee loader kits for starters.

the problem is trusting your life to hand loaded cartridges, dont give me a lecture on how you hand loaded thousands of cartridges and never had one fail,misfire,jam (not saying that cant happen with company manufactured cartridges but the failure rate is extremely low), im talking about people just getting into firearms and handloading

Thread belongs on /k/

A drill and a router using their jig. Or you can pour your own poly receivers

Attached: 2020-03-31 13.58.51 ar15mold.com 16fd71057537.png (485x822, 438.09K)

>call cops over shit reason
>one cop shows up
>follow him behind
>explain this that
>when he turns around, smack his head with a hammer
>take the gun
>take keys
>search through car to find AK-74

Ok so Mutts have no balls?

I CANT EVEN FUCKING ORDER THESE IN MY GAY ASS FUCKING STATE. FUCK DEMOCRATS, ANTI AMERICAN NIGGERS. FUCK THEM ALL.

A drill press, X-Y vice grips, and a Dremel. Or a router, which will be a little more pricy.

You belong on /k/, motherfucker

we have AR's not ak's, problem is dashcam footage

Are there any that will ship to a NY address?

ammoland.com/2019/09/ny-state-sends-cease-and-desist-orders-to-sites-selling-80-lower-receivers/

Attached: 1552358315376m.jpg (1024x781, 84.15K)

I found a source of military powder that has the same characteristics as consumer grade powder. In fact it was used in the military before being rebranded and sold to consumers. There's still places you can find primed brass.

how did you know american cops have the ak 74?

at present this thread would be appropriate on either board
it's more on topic than any BLACKED or similar slide threads
fuck off nigger

Once you assemble it you're breaking the law for not having a serial number. Enjoy taking that to the range.

It's a dangerous world out there. It's about time people learn to take care of themselves

it's not illegal, but you do need a background check for lowers.

>flat dark earth
Yo wut

there are serial numbers on the lowers brainlet

I believe that these guys will. It's a mold and polymer resin

ar15mold.com

under federal law it isnt required to have a serial as long as its used as your own personal firearm (not lent to someone or sold)

your state laws may vary though

range? who shoots at a range?

where should one shoot?

Backyard

Those are illegal here.
And the law doesnt specify when the cutoff is, like can I get a 79% lower? 69%? 59%? The law here doesnt specify when its illegal, just the whim of whatever law enforcement agency sees it at the time.

its probably the exact same, this is how companies profit enormously from the government, in one bin parts go to the consumer market, and the other bin parts are marked as mil-std for 10x the consumer price

>will not ship to nj

You guys know how you can make bolt-together lowers from 1/8" sheet aluminum and some thicker bar stock?
What if we 3D-printed jigging so you could finish these from stock with a hand drill and router?

Attached: rxvr16.jpg (622x406, 75.81K)

Data mining thread.

BLM land, just be sure to be far away from retarded rednecks who dont abide by any gun safety norms

Depends on where you're at. In the West there's a bunch of BLM land that is open. I don't know about the East, but I bet there are ranchers and farmers that would be happy to have you practice on ridding their fields of vermin.

this. what a joke. those are finished Spike's Tacitcal lower prices

got plans for that?

everyone's making guns in meme colors now because people want to play desert soldier or some /fa/ shit

What range do you go to that checks your serial #??

It's from the ar/k/

What about cali?

Nigger the fact you’re talking military/consumer “grade” powder means you’re playing pretend.

righttobear.com still ships to NY

theres already a bunch of jigs and info available on cody wilsons new website, its paywalled however

Not if you make your own from 80% lower.

Not on 80%.

>$130 for an 80% lower.
No.

Not for 80% you don't.

OP already answered this, ships to cali

however keep in mind CA state law requires a serial on the lower BEFORE you start doing anything to your 80%

maybe the laws will change after the virus shit is over, enormous amount of new people getting into firearms in CA

looks like you need to get you a girlfriend in Arizona

Yes there are.

Here even if you could makeshift a gun you couldn't buy ammo so...

dashcam can be removed and tossed into a river, car can be torched. besides, look my flag, mutt.

look my flag, memeflaggot.
this works anywhere in the world, no matter the weapons police has. it's your will to obtain weapons, not how legal it is you pussy's.

This... Half you faggots don't know how or have the tools to make it a 100% lower..

dont hold out an insane amount of hope for Arizona, theres already a massive amount of californians invading that state and are spooling up to pass new draconian gun laws

I don't know how and /k/ calls me a glownigger every time I ask for help

Still trying to find the plans for an AR14 like all the democrats are scared about. Hopefully it comes with the chainsaw bayonet like they talked about in USA Today. It was real... in my mind, said the (((democrat))).

Attached: Chainsaw bayonet USA Today.jpg (1280x720, 72.52K)

Next time you drive out of state for a vacation stock up

cops in the US have a lot of resources and good communication. depending on where u live, they can appear in like 60 seconds

Like I'm imagining you could insert cheap oilite bearings in the nearest internal diameter smaller than the drilled hole diameter into the 3D print, drill through the contained metal workpiece, and use the drilled hole as a pilot hole for actual sized bit
For the milled features you could throw an endmill in a router and line the walls of the jig with some thin steel strips. Could probably even print a stair-step depth gauge right into the jig
Only real stumbling block is that the 1 13/16"-16 tap is both expensive and potentially traceable

Sold out.

its illegal to do that :^)

You ever hear of cloud internet uploading?

lmfao, wrong.

Not on mine.

faggot

16 lbs of WC-846 smokeless double-base rifle powder packaged in two 8 lb UN 4G Rated Hazmat Jugs within a re-usable shipper kit. The jugs as shown are fully individually labeled for easy re-sale on store shelves. This military grade smokeless powder is a ball-style powder manufactured by Saint Marks (General Dynamics) for the US Army. It was pulled down in 2018 for the Fort Smith Arms and Ammunition Plant (FSAAP) at Lake City Army Ammunition Plant by certified Lake City & ATK Engineers. It has been certified for re-use, pressure, burn rate, accuracy, and unique lot numbers by both entities under ISO: 9001 standards before packaging for re-sale.

This is excellent powder for use with: .223 Rem., 5.56×45 NATO, .308 Win, 204 Ruger, 17 Remington, and many other calibers.

It loads very similarly to Hodgdon BL-C2 powder.

fedarm.com/product/wc-846-powder-for-rifle-like-bl-c2/

"Similar to BL-C(2). Work up all loads using BL-C(2) minus 10% Minimum Load"
americanreloading.com/en/264-gunpowder

I want this one

Attached: 1510199387492.jpg (870x456, 140.44K)

Only if you pay for the engraving. Trust me.

ive hand loaded thousands of rounds with no misfires, ftf, fte,etc. the key is to stick it in your dickhole 1st

just call them for a disturbence and one will come. he turns around, you hit the occiput with a hammer or any blunt object. he will pass out instantly.

yeah, it's surveilled in realtime by fbi in the USA. good luck with that mutt.
ever heard of just purchasing guns in the darknet? 500€ in XMR for a AK-103.